**General Agriculture MCQ**

**#‘Bar cramp’ is a tool of—**

** (A) Wood cutting **

**(B) Catching tightly wood **

**(C) Beating tool **

**(D) Smoothing tool **

**(E) Making round end of wood**

**#Nail (Keel) pulling is done by— **

**(A) Claw-hammer **

**(B) Pincer**

** (C) Plier **

**(D) None of these **

**(E) All of these**

**#‘Forging’ is said— **

**(A) Heating the iron **

**(B) Beating the hot iron **

**(C) Converting into desired shape by beating the iron **

**(D) Beating iron and making hole in it **

**(E) For all above work**

**#‘Anvil’ (Nihai) is used for— **

**(A) Beating the iron on keeping over this **

**(B) By beating iron through this **

**(C) Heating iron through handling this **

**(D) Cooling of hot iron **

**(E) Giving various shapes by beating of hot iron**

**#Fire is pulled-up through— **

**(A) Poker **

**(B) Sewage block **

**(C) Showel **

**(D) Anvil **

**(E) None of these**

**(General Agriculture MCQ)**

**#‘Sledge’ is used to— **

**(A) Lift heavy material **

**(B) Fire furnace **

**(C) Cut the iron in cold condition **

**(D) Cut the iron in hot condition **

**(E) Put shine on chisel (rukhani)**

**#The roller of cane-crusher is made-up of which steel ? **

**(A) Cast iron **

**(B) Gun metal **

**(C) High carbon steel **

**(D) Wrought iron **

**(E) Mild steel **

**#The tool used for catching (handling) the claw and turning it hither and thither during beating is called—**

** (A) Sewage block **

**(B) Chisel **

**(C) Plier **

**(D) Tongs **

**(E) File **

**#Punches are of—**

**(A) Two types **

**(B) Three types **

**(C) Four types **

**(D) Several types **

**(E) Only of one type**

**#A mould-board plough is cutting a furrow of 20 cm width and 15 cm deep. If the soil resistance is 0·3 kg/cm2, having the speed of bullocks 3 km per hour. What would be the required Horse Power (H. P.) to draw the plough ?**

** (A) 1·5 **

**(B) 1·0 **

**(C) 2·0 **

**(D) 3·0 **

**(E) None of these **

**(General Agriculture MCQ)**

**#A three-tine furrow plough is ploughing at a speed of 2 km/hr and the each furrow size is 20 cm wide and 12 cm deep furrow. How much time, it would require to plough 5 hectare land ? **

**(A) 41 hours 40 minutes **

**(B) 40 hours 55 minutes **

**(C) 20 hours 55 minutes **

**(D) 55 hours 55 minutes **

**(E) None of these **

**#If a gear ‘A’, having 50 teeth and running at a speed of 200 r.p.m. is driving to another gear ‘B’ having 125 r.p.m. How many number of teeth in gear ‘B’ ? **

**(A) 500 **

**(B) 400 **

**(C) 80 **

**(D) 60 **

**(E) 30**

**#A gear ‘A’, having 12 teeth, is driving and connecting to gear ‘B’ of 12 teeth. The speed of gear ‘B’ is 200 r.p.m. On the shaft of gear ‘B’ another gear ‘C’ is attached having 12 teeth, which is driving to a separate gear ‘D’. If gear ‘D’ has 6 teeth, what would be the r.p.m. (revolutions per minute) of last gear ? **

**(A) 600 r.p.m. **

**(B) 530 r.p.m. **

**(C) 250 r.p.m. **

**(D) 300 r.p.m. **

**(E) 400 r.p.m. **

**#A 10 cm wide belt is running at a speed of 900 r.p.m. If the 15 H. P. is available, then how much plies of belt ? **

**(A) 3 **

**(B) 10 **

**(C) 6 **

**(D) 8 **

**(E) 4**

**#How much width belt would be needed if 20 H. P. is to be transferred through a belt of 10 plies, where speed of belt is 1460 r.p.m. ? **

**(A) 4 cm**

** (B) 10 cm **

**(C) 5 cm **

**(D) 6 cm **

**(E) 8 cm**

**(General Agriculture MCQ)**

**#A 10 cm wide belt, having the speed of 1350 metre per minute, would be appropriate to transfer the how much H. P. ? **

**(A) 20 **

**(B) 15 **

**(C) 25 **

**(D) 40 **

**(E) 30**

**#A tractor driving pulley has its 25 cm diameter and revolving at a speed of 960 r.p.m. If on the shaft of a thresher, an attached pulley is revolving at a speed of 1600 r.p.m. what would be the diameter of this pulley ? **

**(A) 16 cm **

**(B) 15 cm**

** (C) 12 cm **

**(D) 20 cm **

**(E) 18 cm**

**#A pulley of 21 cm diameter and revolving at 1600 r.p.m. Find out the speed of the belt running over it. **

**(A) 1120 m/minute **

**(B) 1200 m/minute **

**(C) 1056 m/minute **

**(D) 840 m/minute **

**(E) None of these**

**#If the distance between two pullies, having the diameter of 45 cm and 39 cm, is 3·2 metre, then what would be length of required flate belt ? **

**(A) 6·8 m**

** (B) 7·72 m **

**(C) 9·4 m **

**(D) 7·2 m **

**(E) 8·4 m**

**#Two pair of bullocks are ploughing a field by victory ploughs at a speed of 2 km/hr. If the average width of each furrow is 25 cm. How much time will be required to plough one hectare land ? Where after each two hours working, 20 minutes rest is required to provide ? **

**(A) 10 hours **

**(B) 8 hours **

**(C) 11 hours 40 minutes**

** (D) 8 hours 20 minutes **

**(E) 11 hours**

**(General Agriculture MCQ)**

**#If the relative distance is 2·5 metre of centre points of two pullies, having 50 cm and 25 cm diameters, then, how much length (metre) of ‘V’ belt would be required ?**

** (A) 6·18875 **

**(B) 5·18775 **

**(C) 6·28775 **

**(D) 6·18775 **

**(E) 5·28775**

**#Which of the following formula is correct (true) for calculating the horse power (h.p.) of pump in irrigation, if discharge of water (cubic metre per second) is denoted by ‘D’ and pump efficiency (P. E.)—**

**(A) hp =50 × D × H 75 × PE**

**(B) hp =75 × D × H 44 × PE**

**(C) hp =100 × D × H 44 × PE**

**(D) hp =1000 × D × H 75 × PE**

**(E) hp =44 × D × H 550 × PE**

**#If the rate of electricity is rupee one per unit, then, a 20 h. p. electric motor, having approx. 100% efficiency will require how much cost (Rs.) on 100 hours running to irrigate the field ?**

** (A) 500 **

**(B) 750 **

**(C) 1500 **

**(D) 2000 **

**(E) 300 **

**#‘Drip’ irrigation is generally followed in the country— **

**(A) Israel**

** (B) America **

**(C) Australia **

**(D) Japan **

**(E) Germany**

**#In India, under canal net-work system of irrigation, generally, how much amount of water is allowed to run in small canal ? **

**(A) Less than 4 cusec **

**(B) Less than 10 cusec **

**(C) Between 15 to 20 cusec **

**(D) Between 25 to 30 cusec**

** (E) Between 35 to 45 cusec**

**(General Agriculture MCQ)**

**#Method of irrigation is— **

**(A) Surface irrigation **

**(B) Sprinkler irrigation **

**(C) Drip irrigation **

**(D) Sub-surface irrigation **

**(E) All of these **

**#The Torque—a power to generate revolutions is expressed as (its unit is kg metre)—**

** (A) Length of arm (m) × Force (kg) **

**(B) Length of arm (cm) × Force (kg) **

**(C) Length of arm (m) × Force (g) **

**(D) Length of arm (mm) × Force (mg)**

**#Work is expressed by the formula as— **

**(A) Work = Force (kg) × Distance (m) **

**(B) Work = Force (g) × Distance (m)**

**(C) Work = Force (mg) × Distance (m) **

**(D) Work = Force (kg) × Distance (cm) **

**(E) Work = Force (g) × Distance (cm) **

**#The length of ‘Engineer chain’ is— **

**(A) 100 ft **

**(B) 80 ft **

**(C) 20 ft **

**(D) 50 ft **

**(E) None of these**

**#The length of ‘Gunter chain’ is— **

**(A) 66 ft **

**(B) 100 ft **

**(C) 20 ft **

**(D) 90 ft **

**(E) 10 ft**

**(General Agriculture MCQ)**

**#The area of an acre is— **

**(A) 0·40 **

**(B) 0·80 **

**(C) 1·10 **

**(D) 0·60 **

**(E) None of these**

**#One centimetre is equal to— **

**(A) 5 mm **

**(B) 10 mm **

**(C) 15 mm **

**(D) 20 mm **

**(E) None of these**

**#The area of a hectare is equal to— **

**(A) 5000 m2 **

**(B) 8000 m2 **

**(C) 10000 m2 **

**(D) 400 m2 **

**(E) None of these**

**#How much horse power (h.p.) is in one kW (Kilowatt) ?**

** (A) 1·34 **

**(B) 1·90**

** (C) 2·00 **

**(D) 3·80 **

**(E) 2·40 **

**#Man power is considered equal to how much horse power (h.p.) ? **

**(A) 0·1 **

**(B) 0·2 **

**(C) 0·3 **

**(D) 0·4 **

**(E) 0·5**

**(General Agriculture MCQ)**

**#Animal driven cane planter is developed by— **

**(A) ICAR**

** (B) CIAE **

**(C) IISR **

**(D) IARI **

**(E) None of these**

**#Agricultural tractors are generally having horse power (h.p.)— **

**(A) 20-50 **

**(B) 50-70 **

**(C) 10-15 **

**(D) 20-25 **

**(E) None of these**

**#How many m.m. are in one foot length ? **

**(A) 304·8 **

**(B) 404·8 **

**(C) 204·8 **

**(D) 104·8 **

**(E) None of these**

**#A ‘chain’ contains how much metre ? **

**(A) 20·1168 **

**(B) 21·1168 **

**(C) 15·1168 **

**(D) 18·1168 **

**(E) None of these**

**#The draft of ‘Victory plough’ is—**

** (A) 80-100 kg**

** (B) 40-50 kg**

** (C) 70-80 kg **

**(D) 10-20 kg **

**(E) None of these**

**(General Agriculture MCQ)**

**Read More-**